How do I know my WiFi IP address?
How do I log into my 192.168 1.1 IP address?
Turn on your router and connect it to your computer with an Ethernet cable. Open your favorite web browser and type “http://192.168.1.1” into the address bar. Enter the correct router login/password combination.
Does my home WiFi have an IP address?
Typical home networks use IP addresses that start with 192.168. Often the router will have an IP address such as 192.168. If your Internet Service Provider (ISP) installed your router, they know both its IP address and the userid/password for it.
If you cannot reach the login page, it may be due to: A hardwired connection configuration issue (such as a bad Ethernet cable) Entering the IP address incorrectly. An IP address issue on the computer.
You log into your router's firmware through a browser. Any browser will do. At the address field, type the IP address of your router. Most routers use an address of 192.168.1.1.
An IP address is typically written in decimal digits, formatted as four 8-bit fields separated by periods. Each 8-bit field represents a byte of the IP address. This form of representing the bytes of an IP address is often referred to as the dotted-decimal format.
PLDT routers, by default, use the IP address of 192.168. 1.1.
Enter the router's username and password in the login window. "Admin" is the most common default username. "Admin," "Password" or a blank password are the most common default passwords. If your router uses something different, it should be listed in the router's documentation.
What Is the 192.168. 0.1 Router IP Address. The IP address 192.168. 0.1 is one of 17.9 million private addresses, and it's used as the default router IP address for certain routers, including some models from Cisco, D-Link, LevelOne, Linksys, and many others.
To access a router, you must know the router's IP address and the administrative user's password and username. To request a connection to the router, enter the IP address in a web browser—http://192.168.1.1, for example. Make sure you're using the correct IP address.
Most Android devices
Go to Settings. Under Wi-Fi, tap your current active Wi-Fi network. Tap Advanced. Your default gateway's IP address will appear under Gateway.
Log in using a web browser. Now that you have the router's IP address, open any web browser and type (or paste) the IP address into the address bar. Your router's login panel will then load within the browser window.
Find Your Router's IP Address on Android
If you use Wi-Fi Analyzer, tap the “View” menu and then select “AP List.” At the top of this screen, you'll see a “Connected to: [Network Name]” header. Tap that and a window will appear with more information about your network.
Click the Start icon and select Settings. Click the Network & Internet icon. To view the IP address of a wired connection, select Ethernet on the left menu pane and select your network connection, your IP address will appear next to "IPv4 Address".
My recommendations are:-
|192.168.25.1||Your Router or whatever you set as your gateway to the Internet|
|192.168.25.15||Your network switch. Not all switches can have (or need) an IP address assigned to them|
|192.168.25.20 to 192.168.25.30||Other special devices that require a static IP address|
You can identify the class of an IP address by looking at its first octet. Following are the ranges of Class A, B, and C Internet addresses, each with an example address: Class A networks use a default subnet mask of 255.0. 0.0 and have 0-127 as their first octet.
This would indicate that the PC has connected (been rebooted?) 3 times and each time the router has assigned a different address even though it still has the previous addresses in its table. A router should normally reassign the same address so this may indicate a problem with the router.
Open your internet browser and put http://192.168.1.1 and use admin as your default username and 1234 for password. Once you have opened the Wi-Fi modem User Interface, log in using the default username and password which can be found at the back or under the modem.
For PLDT Fibr, DSL and VDSL routers, the default username is admin and the password is also admin. The default gateway is 192.168. 1.1. You can login to your PLDT admin dashboard using those aforementioned credentials.
From the Apps menu, select "Settings". Select "Wi-Fi". Within the list of networks, look for the network name listed next to "Connected". This is your network's SSID.
To locate the default username and password for the router, look in its manual. If you've lost the manual, you can often find it by searching for your router's model number and “manual” on Google. Or just search for your router's model and “default password.”