How do icicle Christmas lights work?
When the bulb is new, all of the electricity goes through the main filament, emitting that nice warm light. The shunt does not pass any electricity. When the main filament burns out, the shunt is supposed to take over, allowing electricity continue to flow through the bulb. (The shunt does not get hot enough to glow.)
How do you use icicle lights on bushes?
Where do you plug in icicle lights?
Some popular spots for outdoor Christmas lights include: Along your rooflines or eaves. Atop bushes, hedges and trees. Around pillars, posts or deck railings.
Locate the icicle light strand that is farthest out from the outlet. Unplug it to see if the rest of the strands then light up. Often, a bad strand will cause the rest in the line to go out. Removing the bad strand should cause the rest of the strands to the outlet to light.
Use Adhesive Light Clips
There's also a way to hang your lights without the gutter guard or the 3/8-inch slit coming into play at all. You can opt for light clips with an adhesive backing that affix directly onto the front surface of your gutter.
Just click on it and choose the option “Put Up Decorations” and the game will automatically put them up. Or, you can manually choose it yourself by selecting “Select Holiday Decorations.” This will allow you to first choose a location that's eligible, and then selecting from a large assortment of decorations.
For shrubs, use mini lights with 25 to 50 lights per set on a green cord—they'll blend in much better than netted lights. Tuck them into shrubs in a random pattern, keeping the strings 4 to 6 inches apart. And wrapping bulbs running between bushes with black electrical tape saves you from having to buy blackout caps.
The light string is not designed to be shortened. The only way is to cut and terminate the wire.
If you don't mind a little asymmetry, then don't sweat it! But if you do, you're probably wondering, “Can you cut string lights?” The short answer is: yes.
How Long Do LED Christmas Lights Last?
|LED Christmas Light Grade||Seasonal Basis||Year-Round Basis|
|Commercial Grade LED||6 to 7 Years||24 to 30 months|
|Pro Grade LED||6 to 7 Years||24 to 30 months|
|Retail Grade LED||2 to 3 Years||6 to 12 months|
If only half the strand is out
If half a strand is working and the other half is not, you probably have a loose or broken bulb. Start with the first unlit bulb and work your way down, wiggling them to check for looseness. If it flickers, that's your cue to replace it.
You can tell which bulb is out on your string of traditional Christmas lights by looking for the bulb that is “burned out” by looking at the tiny little filaments in the light bulbs to see which bulb is “burned out” or has lost it's filament. Many times the bulb will be “smoked” as well.
Typically, these strings of lights have two tiny fuses, one in each side of the AC line, located inside the AC plug. The fuses are intended to melt or "blow" before the copper wires in the string could melt or cause a fire from overload. Sometimes the instructions with the lights say, for example: "DO NOT OVERLOAD.
It is important to note that some sets are more prone to outages due to broken bulbs. So the bottom line is that if one bulb goes out, but it's still intact, then yes, the light set will stay lit. But if the LED lens is significantly cracked or damaged, then anywhere from half to the full set will go out.
When you're hanging Christmas lights on a roof, you shouldn't use any fasteners that puncture the shingle or any other part of the roof, such as nails, staples or screws. Even small holes in the shingles can create leaks.
One of the ways to hang outdoor patio lights without nails is using adhesive hooks or gutter hooks. Alternatively, you can tape or staple them to your wall. You can also hang them on trees, bushes, posts, potted plants, and your fence. Another way to brighten up your patio is by using lanterns.
There is an object called "The Attic Stack Decoration Box" (it looks like several plastic boxes stacked on top of each other) that when you interact with it, will allow you to put decorations such as lights and flags all over the house exterior. You can put them up for every holiday.
Change lightning. You can even change the lightning of the Holiday Tree. Give it a warmer glow by using a yellow light or make it look more modern with a subtle blue light. If you sabotage the tree and put on lights there is a chance it will set on fire.
The holder/clip holds all types of lights on roofs and gutters. Hangs all type of Christmas lights by their cords on shingles and gutters. Connects to the wire of string lights to hold them in place.
General Rule: For heavy lighting, plan for around 200 mini Christmas tree lights per vertical foot-and-a-half of tree. If you prefer medium lighting, 100 mini lights per foot should be enough.
How Many Christmas Lights To Use. When decorating your house eaves, a simple rule is to start with at least 60 feet of string lights.
Indoor Christmas lights will have a green UL listed tag, or a silver tag with the “UL” written in green. Christmas lights approved for the outdoors will have the UL listed tag in red, or silver with red writing.
Perhaps the most popular choice is to use mini-lights - preferably LED mini-lights. 5 mm Wide Angle Conical, specifically, is a great choice for wrapping trees. And it's the bulb of choice for the vast majority of professional lighting installers.
It will be less if you just want the lights swirled around the tree, as opposed to wrapping each branch. The price for tree wrapping can range anywhere from $50 to $5,000.
If you can't repurpose your backyard to hang the lights, then the next best option is to go with adhesive hooks. They can be bought at any hardware store and allow you to hang lights without leaving nail holes in your walls.