How Do You Measure A Corner On A Toilet

How much space is needed for a corner toilet?

How much space do you need for a corner toilet? Most plumbing codes require a corner toilet to be installed at least 15 inches from the center of the toilet unit to any side wall or obstruction (such as cabinets) and not closer than 30 inches to any other sanitary fixture (measured center to center).

How do you fit a corner toilet?

How is toilet bowl offset measured?

Measure from the wall behind the toilet to the center of one of the closet bolts (which hold the toilet down). If the toilet has four closet bolts, measure to the center of one of the rear ones. Then measure from the center of the mounting holes to the back of the new toilet you're considering.

Can you replace a 12-inch rough in toilet with a 10 inch rough in toilet?

A toilet with a 12-inch rough-in will definitely not fit into a space with a 10-inch rough-in, but a toilet with a 10-inch rough-in actually has extra space in a 12-inch rough-in space.

How far should a toilet be from the back wall?

The Distance To Set The Toilet Flange From The Back Wall. You'll want to set the center of the water closet flange 12 inches from the finished back wall.

How far should a toilet be from the wall?

The standard distance from the back wall is 12 inches, or 12-1/2 inches from the center of the flange to the wall framing. Minimum distance in front of the toilet to the facing wall or fixture is 21 inches.

How do you measure a toilet flange?

The 4x3 size refers to the two diameters in the flange pipe. The top side of the flange, which connects to the toilet, is 4 inches in diameter, while the bottom diameter of the pipe is 3 inches. The bottom is designed to fit on 3-inch schedule 40 pipe used in most homes as standard sized drain pipe.

Are toilet bowls standard size?

Standard toilet dimensions are typically between 28–30" deep, roughly 20" wide, between 27–32" high, and have a rough-in between 10–14".

What does 12 rough-in mean for toilet?

The toilet rough-in refers to the distance from the finished wall to the center of the toilet's floor drain or waste outlet. Most toilets have a rough-in of 12 inches, although it's not uncommon for older homes to have an unusual size such as 10" or 14". Rear-outlet toilets are configured a bit differently.

What is a corner toilet?

What is a Corner Toilet? A corner toilet, or a space-saving toilet, is exactly what it sounds like. The toilet bowl portion of the toilet looks, and is used, just like a regular toilet but the water tank is shaped into a triangle shape so that it can be easily tucked into a corner.

How do you install a toilet flange?

How do you rough in a toilet flange?

What measurements do you need to replace a toilet?

Taking Measurements

If your existing toilet has four bolts, measure to the center of the back bolts. This measurement is known as the rough-in measurement. For a standard toilet, the rough-in measurement should be between 11 inches and 13 inches.

Can you move a toilet over a few inches?

Yes, you can actually move a toilet. Even moving a toilet by a few inches without having to make a new hole in the floor is possible. You can use an offset toilet flange to move the toilet by a couple of inches on any side. This will allow you to use the same wastewater line and in turn help to save you a lot of money.

Should a toilet tank touch the wall?

No, there is no standard distance a toilet tank should set out from the wall. There are standard rough in distances, the most common is 12" with a few at 10" and a few at 14", but the actually distance the tank will be from the wall will vary.

How much space should be between toilet and vanity?

A toilet should have some elbow room between it and another fixture or vanity. The NKBA's recommendation is at least 18″. Codes allow a minimum distance of 15″. If you're placing your toilet in a compartment, it should be 36″ x 66″, although codes will allow 30″ x 60″.

How far should toilet flange be above finished floor?

Check the Flange Height

With the toilet removed, you can see the toilet flange and measure its height above the floor. The optimum flange height to aim for is 1/4 inch above the finished floor. This typically allows for almost any type of wax ring to be used and still ensure a good seal.

What is the difference between a 12 and 14 rough-in toilet?

While 12-inch rough-ins are more generally common than 14-inch rough-ins, they both have their merits, and sometimes you need to reduce the space taken up behind the tank, which is where a 14-inch rough-in comes in handy. So if you're looking to install 14-inch rough-in toilets, then you've come to the right place.

Why use offset toilet flange?

For the waste water line, an offset toilet flange will allow you to move the toilet a couple of inches in any direction without having to cut a new hole in the floor or reconstruct the waste water pipe.

Is it OK to use an offset toilet flange?

Yes, all offset flanges will affect the flow somewhat, some drastically. A company named Sioux Chief makes one that I would not hesitate to use on my own home, called a Full Flush, part #889-POM (PVC) or 889-AOM (ABS).

Does toilet flange go inside pipe?

Buy an inside closet flange. This toilet flange is designed to glue on the inside of the pipe or expand inside the pipe. If the plastic pipe has a 3-inch inside diameter, you'll have to remove the old flange from the outside of the pipe.

Are all toilet flanges the same size?

Toilet flanges come in six different types and three standard sizes with the option of an odd fit. The types are based on the material from which they are made, that is aluminum, copper, brass, stainless steel, plastic, and cast iron. The sizes also range from a four by three, four-inch, or three inches flange.

What is the diameter of toilet flange?

The standard flange size is 3 inches in diameter. The standard plumbing hole for a toilet is the flange, the waste pipe that fits through a hole in the floor. Comprised of two parts — a pipe and a ring bolted to the floor — the flange will connect the toilet to the household's waste line.

Does a toilet flange fit inside 3 inch pipe?

An inside fit 3" flange will work okay with some toilets, but not all. That extra 1/2" or so smaller diameter means any waste needs to be pointed more closely down the drain rather than trying to turn at the last moment.

How do I know if my toilet is round or elongated?

You can determine the shape by measuring the distance from the back of the toilet bowl to its front edge. Here's how you do it. If the length is between 18-19.5 inches, you have an elongated toilet bowl seat. If the length is between 17-17.75 inches, you have a round toilet bowl seat.

Can an elongated toilet replace a round toilet?

An elongated toilet seat will technically fit on a round toilet, but the fit and comfort may be compromised. An elongated toilet seat will likely overhang a round toilet which may be fine unless the rim of the toilet is visible within the opening of the toilet seat.

Are toilet seats different sizes?

As we said, toilet seats come in two sizes: round and elongated. Every toilet seat is one of these two, indicated on its packaging. It's not always easy to tell by looking at the seat, which is why measuring is important.

What is comfort height toilet?

Traditional toilets are 15 inches high. Comfort height toilets (or “right height” toilets) have higher seats than traditional toilets, usually between 17 inches and 19 inches. Comfort height toilets are becoming a popular option for many households.

Leave a Comment

Your email address will not be published.