How Do You Expose A Aggregate Concrete Driveway

Table of Contents

Can you change the color of aggregate concrete?

Exposed aggregate can be stained or dyed to shift or change the color upon completion. Exposed aggregate is done by using a chemical retarder on the surface of the concrete during its placement. It is also a cost effective method of getting a decorative concrete finish.

Can you expose existing concrete?

It can be applied to any concrete that has been cured for a minimum of 28-days. It is a spray-on application that is 2-3mm thick on top of the existing concrete. We can then work with this to create a plain, speckled or flecked finish that looks like exposed aggregate.

Can you resurface exposed aggregate concrete?

Exposed aggregate concrete is a decorative finish where the top layer of concrete is removed to reveal the small aggregates beneath the surface. This means if you have an existing concrete surface that is structurally sound, we can resurface it to look like exposed concrete.

Can you paint aggregate concrete driveway?

Exposed aggregate is used in driveway and walkway applications. A change to your landscaping or house color may prompt the desire to paint your aggregate to match. Whatever your reason for painting your aggregate, treat it just like painted concrete to get a solid, durable finish.

How do you expose aggregate on old concrete?

Brushing and washingThis is the oldest method and the simplest because it doesn't require chemical retarders or special tools. You just wash away the thin layer of surface mortar covering the aggregate by spraying with water and scrubbing with a broom until the aggregate is exposed to the desired depth.

How do I restore exposed aggregate?

Oil & Grease Stains

The best way to clean oil and grease stains from your exposed aggregate driveway is to apply a driveway cleaning solution that will break down the oil. Luckily, you can make this mixture using household products like dishwashing liquid or baking soda.

How do I fix exposed aggregate?

How much does exposed aggregate driveway cost?

The exposed aggregate driveway costs approximately $100 to $150 per square metre. This type of concrete is applied after the concrete slab is poured, or over an old concrete after deep cleaning and reparation.

What is the cost of exposed concrete?

- Exposed aggregate concrete pricing ranges from $13.00 - 16.00/ square foot. - Colored and stamped concrete pricing ranges from $16.00 - 19.00/ square foot.

Is Exposed aggregate bumpy?

Exposed aggregate is usually a smooth rock.

How can I change the color of concrete?

To change the color of concrete before it is poured, add a tint or dye to the mix. People who want to use concrete in their landscaping often ask how they can change the color. If the concrete has already been poured your best option is applying a stain to the surface.

How do you paint over exposed aggregate concrete?

An oil-based masonry paint gives the best results on exterior surfaces. This transfers readily onto the aggregate concrete. Apply 3 to 4 thin coats of paint in the same manner as you applied primer. However, you may prefer to apply additional coats to get a deeper color and a more resilient surface.

Can you change the Colour of your driveway?

Yes it is totally possible to change the colour of your concrete. If you are looking to give it the 2 tone look then Imprint should have you can apply a diluted coat of the smartcolour (a darker colour), allow to dry and then seal.

Can I paint Pebblecrete driveway?

Unfortunately paving paint and garage paint systems are not compatible with pebblecrete. Your other option is to clean your pebblecrete with a high-pressure washer to remove the mold infestation between the pebblecrete.

What is a concrete aggregate?

Concrete aggregates are composed of geological materials such as gravel, sand and crushed rock. The size of the particles determines whether it is a coarse aggregate (e.g. gravel) or a fine aggregate (e.g. sand). The resulting concrete can be used in its natural state or crushed, according to its use and application.

Can Pebblecrete be painted?

Paving paints have great difficulty adhering to Pebblecrete surfaces. If you would like to remove the Pebblecrete you can use Megatreat's textured primer coat. You can then colour the primer with Megatreat's Liquid Sandstone in charcoal colour (there are a couple of colours in the dark grey range).

How often should I seal my exposed aggregate driveway?

Depending on weather and traffic, when using an acrylic sealer exposed aggregate concrete should be sealed every 12 to 36 months.

How long does Exposed aggregate take to dry?

How long does exposed aggregate take to dry? Wet exposed aggregate can take about a few hours to dry. Since it is a special type of concrete, it will harden right after pouring. It can take about 24 hours to cure, but it is still susceptible to damage for the next four weeks.

Is Exposed aggregate more expensive than concrete?

Question: Is an exposed aggregate concrete driveway more expensive than a standard concrete driveway? Top Answer (90% of 44 votes): Yes. Explanation: Exposed aggregate is more expensive than standard aggregate because it requires more material expense and labor expense.

Can you pressure wash exposed aggregate?

It only removes hard mineral deposits from the surface without deteriorating the cement. This helps to keep the exposed aggregate in place. The Profiler actually need only sit on the surface for about 5 to 15 minutes. At that time you can use a pressure washer to wash away to the sewer.

Should you seal exposed aggregate concrete?

Does exposed aggregate need to be sealed? Yes. These sealers—typically film-forming acrylic resins—can help protect against spalling, dusting, efflorescence, freeze-thaw damage, stains, deicing salts, and abrasion. A sealer will also enhance the color of the aggregate, accentuating its depth and richness.

How do you acid wash an exposed aggregate driveway?

An acid-wash treatment (1 hydrochloric acid to between 10 and 20 parts water) is usually necessary to brighten up the stones by removing the fine cement film from the surface. The surface should first be thoroughly wetted to prevent acid soaking into the concrete and weakening the bond to the exposed aggregates.

How do you seal exposed aggregate concrete patio?

Does aggregate concrete crack?

that fills it will be a lot more visible than the neutral epoxy. there is no concretor that will guarantee against cracking, as long as all efforts and correct installation practices are done, concrete can and does crack.

Is Exposed aggregate worth it?

Those who are not fond of heavy maintenance for their walkways, exposed aggregate is an excellent choice. Other than occasional cleaning and sealing, you do not have to accomplish any other tasks to keep the surface sturdy and appealing. This type of surface is best for the following applications: Driveways.

How much does a cubic Metre of concrete cost?

Prices subject to location of delivery and quantity ordered.

Ready Mix Concrete Prices in London.

Concrete Type Price per m3
C20-25 £90 – 100
C30-35 £95 – 105
C40 £100 – 110
Screed £130 – 140

How much is a cubic Metre of exposed aggregate?

Exposed aggregate concrete costs anywhere from $100 to $150 per square metre, plus labour. If you're ordering direct from a concrete supplier, the cost will be in cubic metres and can be anywhere from $200–$350, depending on its strength.

How much does it cost to pour exposed aggregate concrete?

The national average materials cost to install an exposed aggregate patio is $2.04 per square foot, with a range between $1.90 to $2.18. The total price for labor and materials per square foot is $10.15, coming in between $9.11 to $11.18.

How much does aggregate base cost?

Plain pea gravel and crushed clamshells are each priced at about $40 per cubic yard and $50 per ton.

Gravel Price Estimator.

Materials Price Per Square Foot Cost Per 100 Square Feet (with labor)
Rock Base $0.65 $95
Crushed Stone/ Limestone $2 $230
Rock Pebbles $1.50 $180

Is Exposed aggregate concrete durable?

Very durable – Exposed aggregate patio is highly durable since it has the structural integrity of concrete, it can lasts 40 years or longer. It has a finish that is generally more durable than stamped concrete patios which is another alternative.

Are exposed aggregate driveways slippery?

Exposed aggregate concrete has been popular for decades! The exposed rocks provide a timeless, natural looking pattern and its texture makes sidewalks and driveways a bit slip resistant. The result is a sturdy and beautiful surface that reveals the smooth pebbles in the concrete.

Can you color concrete after its dried?

Step 1: Check Old Concrete Before Staining

Your existing old concrete should be fine to stain, so long as it is not contaminated with glue, paint, oil, grease, sealers, waxes, or anything else that would prevent the stain from soaking into the pores of the concrete.

Can you stain concrete a different color?

Answer: The short answer is, yes. Acid stain will work on any concrete, colored or gray. The big difference will be the final color.

Can you dye concrete when mixing?

You can use dyes to color concrete, such as food coloring or fabric dye. The method for coloring concrete this way is to add the dye to the water before mixing it into the dry concrete mix. Adding a food coloring dye won't make the concrete color as concentrated as it would with a fabric dye.

How do you fix uneven exposed aggregate concrete?

This uneven exposed aggregate surface needs to be treated with an acid wash. This is one of the few times I recommend an acid for a concrete repair. A strong acid wash should help even out the surface. Start with a muriatic acid diluted 1:1 with water.

How do you color a concrete driveway?

How do you fix stenciled concrete?

  • Step 1: Clean the area.
  • Step 2: Remove the existing paint.
  • Step 3: Put masking tape on the edges.
  • Step 4: Apply the first layer of texture primer.
  • Step 5: Place the stencil sheets.
  • Step 6: Apply one more layer of texture primer.
  • Step 7: Apply paint.
  • How do you fix blotchy concrete?

    Your first step should be flushing and scrubbing the concrete. This involves soaking the concrete in hot water and then scrubbing it forcefully with a hard brush. The goal here is to even out some of the variability in the concrete's moisture and mineral build-up.

    Is Pebblecrete the same as exposed aggregate?

    Pebblecrete is concrete that incorporates small pebbles to change its appearance and texture. It's also known as exposed aggregate.

    How much does it cost to resurface Pebblecrete?

    The average cost of pebblecrete is around $80 per square metre more than plain concrete and it might cost around $2,100 in total for a flat surface. Expect to pay around $100 extra to pebblecrete a sloping surface, or even more for a steeper slope.

    Leave a Comment

    Your email address will not be published. Required fields are marked *