Does DWS779 come with blade?
Yes, DWS779 will include blade #DW3126.
What is the correct type of blade when using the miter saw?
Miter saws operate best when they have a blade with a high tooth count. We'll look at the best options here: Crosscut blade: Whereas a table saw can handle both crosscutting and ripping, a miter saw is inarguably suited to crosscutting. That's why you should look for a blade with a high tooth count and smaller gullets.
Does DWS780 come with blade?
Yes – the DWS780 comes as standard with a 12-inch, 60-tooth carbide blade. Carbide blades are renowned for being much stronger than steel equivalents, making them more robust, more durable, and more likely to last longer as a result.
Inside the big yellow box, you'll find everything you need to put the DeWalt DWS779 to work. A 12”, carbide-tipped 32-tooth blade comes pre-installed on the saw. It's a decent-quality blade, and it's fine for general construction.
The DeWALT DWS779 is now discontinued and selling at a reduced price. It was replaced by the DWS780 which is the updated model with some additional features. Unlike the DWS780, the DWS779 does not have the XPS light that indicates the cut line on the workpiece.
Essentially XPS technology uses an LED to project light down either side of the blade, creating a shadow of the blade in the work area. As the blade lowers, the shadow sharpens, darkens and shows exactly how wide the cut will be once it's made.
X-ray photoelectron spectroscopy (XPS) is a surface-sensitive quantitative spectroscopic technique that is used to determine the elemental composition of thin films. This technique provides information about the chemical state and electronic state of the elements that exist within a thin film or a complex stack.
The bevel ranges max out at 45 to 48 degrees. No saw could cut through a 4x4 at a 45-degree bevel angle, nor could any cross-cut a 6x6.
Yes you can.
The only real difference, besides maximum cutting depth, is that smaller blades are often thinner and have a narrower kerf.
Normal miter saw blades will have a tooth count of 60-80. Lower tooth count blades of 50-60 are best for rough cuts to lumber. A precision blade for trim work will typically have a tooth count of 80-100. Therefore, miter saw blades should have between 60-80 teeth.
It's ok to use a smaller blade in terms of it not damaging anything. You have already found out why it's not such a great idea though. The size of the blade will be limited by the saws adjustments.
In a nutshell, Metabo HPT is just a different name and nothing else. The tools are the same, the warranty is the same, the batteries are the same. Batteries like the Hitachi MultiVolt will work in Metabo HPT MultiVolt tools. Hitachi 18V batteries will work in Metabo HPT 18V tools and vice versa.
DEWALT 12-Inch Miter Saw Blade, Crosscutting, Tungsten Carbide, 80-Tooth, 2-Pack (DW3128P5)
As far as precision is concerned, the Dewalt DWS779 is completely good at it. The design of the exclusive back fence allows users to cut timber with dimensional measurements of up to 2x12 inches at 45 degrees and 2x16 at 90 degrees.
A single bevel miter saw only adjusts its positioning in one direction: to the left or right. Therefore, a single bevel miter saw allows you to make one-directional bevel cuts. Single bevel miter saws can make both bevel cuts and miter cuts independently or together.
This is another significant difference between the two machines. The DeWalt DWS780 has a stainless-steel detent plate with a cam lock. It also has a rail lock, which allows you to cut vertically with more success. On the other hand, the DeWalt DWS779 has a double horizontal rail with an excellent clamping system.
Dewalt DWS779 FAQs
No. This model does not have a laser guide, but it comes with an integrated Cutline Blade Positioning System. What is the recommended voltage capacity? The Dewalt DWS779 operates at 120V 60Hz and plugs into a traditional wall outlet or power generator receptacle.
A basic compound miter saw starts at $100, while miter saws with sliding blades start at $125. Dual-bevel miter saws start at $200, and professional-level miter saws with special features can cost as much as $800.
The DW7187 Adjustable Miter Saw Laser System was designed for the professional miter saw user and will only fit the DEWALT DW715 (Only Type I and Type II compatible), DW716 (Type 1-4) or DW718 (all types) 12” Miter Saws.
The XPS work light cut-line technology for the Dewalt DWS779 miter saw is vastly preferred by woodworking professionals over older laser light options offered on lesser miter saws. The LED light is positioned directly above the miter saw blade and casts a shadow of the blade kerf directly onto the piece being cut.
The shadow shows you exactly where the cut will be, and is perfectly sized to the kerf of the blade when the blade is lowered and placed in contact with the work during setup. The Dewalt DWS780 was the second saw I had experienced LED shadow lighting on.
First, the light: DeWalt's XPS Crosscut Positioning System utilizes bright LEDs that are projected on both sides of the blade. This illuminates the work-piece while simultaneously creating a shadow line you can cut to. It's brilliant. Every saw should have one.
How The XPS Shadow Line Works. This system works very differently to the laser guide. There are two led lights that shine onto either side of the blade of the saw which creates a shadow on the cutting surface so you can see exactly where the blade will cut. Even if you change blades the shadow will be perfect.
The bigger the blade, the deeper and wider its maximum cut. Typically, a 10-inch miter saw will cut a 2 x 6 at 90 degrees and a 2 x 4 at 45 degrees; a 12-inch miter saw will cut a 2 x 8 at 90 degrees and a 2 x 6 at 45 degrees. The sliding action can cut even wider boards.
A saw with a 10-inch blade makes right-angle cuts across a board 5 1/2 inches wide, sufficient for two-by-six lumber. The same 10-inch saw will cut a two-by-four at a 45-degree angle. This larger saw can cut a maximum thickness of 3 1/2 inches, enough to cut through four-by-fours.
The Blade Runner
Twelve-inch blades are harder to find, and at a higher price typically at woodworking supply retailers. Theoretically, a 10-inch blade will fit on a 12-inch table saw, but the arbor -- or hole in the middle of the blade -- is typically smaller.
As long as the diameter of the arbor hole on the stacked dado blade set matches the arbor diameter of your table saw or radial-arm saw—and the arbor is long enough for a dado blade—you can use an 8-inch dado blade on a 10-inch table saw.
Best Circular Saw Blades for Your Project. Circular saw blades are designed for use with miter saws, table saws, radial arm saws, cut-off saws and standard circular saws. Many circular blades can be used interchangeably between devices. Safety: Always wear eye and hand protection when using circular saws.
You can always use a slightly smaller blade. 8.25" circular saw blades would be a favorite, they're cheap and easy to find. You won't get the cutting depth of a 10" blade, but if you're not cutting thick stock you'll hardly miss it.
The number of teeth on the blade helps determine the speed, type and finish of the cut. Blades with fewer teeth cut faster, but those with more teeth create a finer finish.
In case of a miter saw the cutting blade is dropped from above the work-piece to make the cut, whereas on a circular saw the blade is fed against the work along a straight path. Likewise, they have a bed that is used to hold the wood (or whatever else is being cut) in place.
The 44-tooth blade (left) makes a smooth cut and is used for trim carpentry and cabinet making. The coarse 24-tooth blade (right) cuts quicker and is used for rough carpentry work.
Miter-saw blades- 80 tooth
Cutting miters is basically crosscutting on an angle, and blades with higher tooth counts generally perform best when cutting across the grain. A blade with 80 or more teeth offers the crisp miter cuts you're looking for.
A 12-inch miter saw is the best saw to cut 4×4 posts in a single pass. This is before you install them on the ground. You need to use a circular saw to cut a 4×4 post in the ground. Depending on the blade size you may need to make several passes to achieve a clean cut.